English
What Are You Looking For?
chip pcd cup wheel is excellent for removing thin mil epoxy coatings, paint, and mastic
MOQ :
1pcPayment Method :
Credit Card, Paypal, Western Union, Bank Transfer etcLead Time :
7-10 DaysApplication :
Used on angle grinder and floor grinding machineMaterial :
PCD Segment+Metal WheelGrit :
Chip PCDSize :
5"Product Introduction:
Bestop PCD Cup Wheels with Chip Segment has a lot of small PCD Chip to minimize damage/gouging in the floor when removing glues and mastics, it provides fast production. These cup wheels are excellent for removing thin mil epoxy coatings, paint, and mastic. The advantages of the chip PCD products are that they will not gouge the surface as much as a quarter round PCD. The PCD segment scrapes and rips the coating from the surface.
The chip pcd cup wheels are available in 4"/100mm, 4.5"/115mm, 5"/125mm, 6"/150mm and 7"/180mm.
How to Use: PCD Grinding Wheels will scratch the floor, so make sure that you grind first in an inconspicuous area to inspect the results on the floor.
Tips & Tricks: Keep the cup level with the floor and pay attention to the removal of the coatings to see if the cup is level and the pressure is right. Work from the edges of the coating to keep the removal consistent.
D180mm diamond grinding wheel with 10 arrow diamond segments, which are designed for aggressive grinding of concrete, glue, and light coating removal
D125mm cup wheel with 8 arrow diamond segments, which are designed for aggressive grinding of concrete, glue, and light coating removal
Grinding wheel with Thick 15mm diamond segment, long life!
D100mm grinding wheel with 6 arrow diamond segments, which are designed for aggressive grinding of concrete, glue, and light coating removal
7 inch grinding wheel with 24 Turbo Segments, 30/40 Grit, Medium Bond, 5/8"-11 Arbor
Diamond grinding wheel for grinding, cleaning, leveling or coating removal for concrete and masonry
Diamond grinding wheel for grinding, cleaning, leveling or coating removal for concrete and masonry
Diamond grinding wheel for grinding, cleaning, leveling or coating removal for concrete and masonry
Diamond grinding wheel for grinding, cleaning, leveling or coating removal for concrete and masonry
L Segment grinding wheels are also used to aggressively grind bare concrete and remove high spots.
L Segment grinding wheels are also used to aggressively grind bare concrete and remove high spots.
S Segment grinding wheels are used to aggressively grind bare concrete and remove high spots.
S Segment grinding wheels are used to aggressively grind bare concrete and remove high spots.
with 10 rain-drop segments, used to aggressively grind bare concrete and remove high spots.
with 18 rain-drop segments, aggressive and longer life!
For grinding concrete, hard granite, marble, engineered stone
For granite, marble, concrete products, masonry, construction materials, and all types of natural stones
For granite, marble, concrete products, masonry, construction materials, and all types of natural stones
The“T”shaped segment hangs over the edge of the cup wheel core to ensure proper preparation right up to any wall
The “T” shaped segment hangs over the edge of the cup wheel core to ensure proper preparation right up to any wall
Diamond grinding wheels are mainly used for grinding and polishing Concrete, Masonry, Granite, Marble and some other construction material.
Diamond grinding wheels are mainly used for grinding and polishing Concrete, Masonry, Granite, Marble and some other construction material.
Aluminum-body diamond turbo cup wheels feature light weight for less stress on the grinder
Aluminum-body diamond turbo cup wheels feature light weight for less stress on the grinder
The zig and zag cup wheel is a highly aggressive cup wheel range designed to deliver high productivity performance
Rapid removal of concrete, glues and coatings from concrete and masonry surfaces
8-Seg diamond cup wheel for angle grinders – for faster grinding of concrete, screed and natural stone
6-Seg diamond cup wheel for angle grinders – for faster grinding of concrete, screed and natural stone
PCD diamond grinding wheels are designed for aggressive removal on urethane epoxy, waterproofing membrane, pool deck coating, thick mastic, paint or VCT/carpet glues
PCD diamond grinding wheels are designed for aggressive removal on urethane epoxy, waterproofing membrane, pool deck coating, thick mastic, paint or VCT/carpet glues
Uniquely manufactured with mining-grade Polycrystalline diamond segments. This makes them the ideal tool for removing those tough, thick coatings on concrete surfaces.
PCD diamond grinding wheels are designed for aggressive removal on urethane epoxy, waterproofing membrane, pool deck coating, thick mastic, paint or VCT/carpet glues
Uniquely manufactured with mining-grade Polycrystalline diamond segments. This makes them the ideal tool for removing those tough, thick coatings on concrete surfaces.
Uniquely manufactured with mining-grade Polycrystalline diamond segments. This makes them the ideal tool for removing those tough, thick coatings on concrete surfaces.
chip pcd cup wheel is excellent for removing thin mil epoxy coatings, paint, and mastic
excellent for removing thick mil epoxy coatings, paint, and mastic
Uniquely manufactured with mining-grade Polycrystalline diamond segments. This makes them the ideal tool for removing those tough, thick coatings on concrete surfaces.
PCD diamond grinding wheels are designed for aggressive removal on urethane epoxy, waterproofing membrane, pool deck coating, thick mastic, paint or VCT/carpet glues
chip pcd cup wheel is excellent for removing thin mil epoxy coatings, paint, and mastic
for Sand of Concrete Walls, Concrete Floors, Granite Stone Marble Masonry Concrete
Segmented grinding wheel for Sand of Concrete Walls, Concrete Floors, Granite Stone Marble Masonry Concrete
for Sand of Concrete Walls, Concrete Floors, Granite Stone Marble Masonry Concrete etc
Used to aggressively grind bare concrete and remove high spots.
Subscribe to get notified about product launches, special offers and news.
